Hardware

We also carry shower rods in heavy duty brass

Shower Door Hinge Options

Pivot Hinges Century's state of the art top & bottom Pivot Hinge. Available in Solid Brass and Anodized Aluminum. This system equally distributes the weight of the enclosure allowing you to install extra tall and wide enclosures while always maintaining safety, our First Priority.

Allowing you to have extra tall and wide enclosers while always maintaining Safety is our first priority.

The Pivot Hinge is the only system which allows 1/4" adjustment front to back and 3/16" side to side. Two decorative choices of a round or flat header secure the Pivot Hinges.

Wall Mount Pivot Hinges

Are also available for the Open Above look. This system allows you to hinge your enclosure off the wall, eliminating the need for a Decorative Header. The hinging wall must not exceed 3/16" out of plumb. This will not allow the pivot points to line up.

Wall Mount Hinges

Solid Brass Wall Mounted Hinges can be mounted directly to the wall. This provides a simple, elegant look. A basic starting point into the Frameless market. The door must hinge off the wall.

Glass Hinge

This hinge system allows you to mount a door to a fixed panel which runs 180o inline. The panel or panels must run full height for safe mounting. Doors can be cut down for ventilation or may run full height.

GLASSTEC SERIES

Hinges

GP/GAP	GPW/GAPW	GW	GG

CHMI Pivot Hinges

Clips

Stationary	Swivel Vent	90 Degree	135 Degree

Handles

Towel Bar	6" C-Pul	8" Spindle	Highline Round	Highline Flat

L 10.113 8" Single Pull

Knobs and Robe Hooks

.75" Pull	1.25" Pull	Melon	Egg

Ball	Crystal

Towel Bars

Traditional	Spindle

Back to Back Modern	6" C-Pull Towel-Bar Combination

Glasstec Specifications

Manufacturer

Manufacture: To establish a standard of quality, design and function desired, Drawings and specifications have been based on Century Bathworks, Inc., 250 Lackawanna Avenue, West Paterson, NJ 07424, (973) 785-4290, Product: “Glasstec,” no substitution will be accepted.

Components

Header, trip and hardware: Extruded Architectural Bronze, copper alloy number 385 or extruded Aluminum, alloy 6463-TS.
Glass: [select one of the following]
- Clear tempered and Star Fire glass: 3/8 or 1/2 inch thick safety glass, ASTM C 1048 FT, complying with Class I clear, quality q3 glazing select, conforming to ANSI Z97.I.
- Custom glazing: [Optional grey tinted, bronze tinted, sandblasted, antique glass, bubble glass, or etched glass is available, contact Century Bathworks for more information.]
Hinge: Adjustable pivot hinge, solid brass or aluminum matching selected frame finish. Hinge shall allow glass to come within 1/32 inch from sidewall, and be capable of 1/4 inch side to side adjustment and 3/16 inch front to back adjustment.

Factory Finish

Header, trim and hardware:

Polished Brass, US 3 finish (Bright brass, clear coated)
Satin Brass, US 4 finish (Satin brass, clear coating)
Antique Brass, US 5 finish (Satin brass, blackened)
Polished Chrome plate, US 26 finish (Bright chromium plated)
Satin Chrome plate, US 26D finish (Satin chromium plated)
Polished Nickel place, US 14 finish (Bright nickel plated)
Satin Nickel plate, US 15 finish (Satin nickel plated)
Polished Gold (24K) finish
Bright aluminum finish: Highly specular bright finish, clear anodized; Aluminum Association AAC31A21
Bright gold finish: Highly specular bright finish, colored anodized; Aluminum Association AAC31A21
Colored finish: Sprayed-applied thermo-set colored finish in manufacturer's standard or custom color as directed by the Architect

Shower Door Diagram

Products

Bring us any Competitors Bid

Frameless Shower Door, Bath Tub Showers
Framed or custom heavy glass frameless shower enclosures, shower door hardware, towel bars
Frameless Shower Doors DC - Shower Door, DC
Frameless Shower Doors Washington, D.C. - Shower Door Wahington D.C.
Frameless Shower Doors Virginia - Shower Door, MD
Rimless Shower Doors